Making Tables

I took some wire screen with 1/2 inch holes and cut out a small piece.  Then I clipped it into this shape and bent four of the pieces of wire downward with needlenose pliers.

Use a heavy duty wire cutter, a sprue cutter may actually break, I have broken two over the years.

Close up for the long table framework.

Bend the long wires down to make the short table..

This is the template for the long table.  

Sheet plastic will make the table top.

Put the sheet plastic between the horizontal pieces for a narrow long table or on top for a long and wide table.

Long narrow table with a chair.