One Inch Maxim Gun

Pack mules, these are some metal figures.  

The pack is an Atlantic WWII Russian Maxim Gun.

The US used a 1 inch caliber Maxim around the turn of the last century.

The Atlantic Russian Maxim is way too large for 1/72nd scale as a .30 caliber weapon.

So I use it as the 1 inch, it's essentially a larger version.

Here with Airfix MP for size.
 

Artillery, Truck, Trailers

Some of my artillery is in the queue.  It's due to have the wheels painted and the ground cover installed. 

The 37mm mountain gun was deployed in units of three guns, here they are!

Painting Eko 2 1/2 ton truck passengers that will be redeployed as Jeep drivers.

Roco 5 ton tracker, ready for wheels to be painted.

Van ready for wheels to be painted, and the landing gear adjusted.

Metal model road grader, after about 30 years it's time to paint it and paint the tires.

Roco trailer, note the front landing gear is a trailer hitch!  Put a drop of gap filling super glue in the center and paint the rim black to make it into a decent replacement for the missing piece!
 

Mountain Gun

T32 gun on T9 tripod.

In WWII US Army Mountain Troops in Italy used this cut down version of the 37mm anti-tank gun.

It was mounted on a .50 caliber machine gun mount.

Roco makes the 37mm ATG and a 50 caliber machine gun mount.

I rummaged around my spares and found a small mounting, cut down a damaged Roco 37mm gun barrel and a new model was born.

The mount was a bit narrow so I cut and then filed the inside between the horns to make space for the gun.

Besides cutting down the barrel length, I also thinned out the side of the barrel where it fit into the mount.

It looks pretty good next to daddy.

It is part of my project to use up the scraps, bits, and crumbs in the collection, repair the damaged, and clean up the clutter.
 

Toothpicks and Palm Pics

Dollar Tree cocktail stirrers.

They were about $1.25 per pack of ten, so 13 cents each.

Day glo green and flat, styrene plastic.

My plan for the Kiss Kiss Club was to make slots in the base and push these into them.  Then they can be removed so I could re-arrange the set up as needed.

Decent detail on the trunk and okay on the fronds.

Since these are decorative palms I figure they could look the same in a nightclub setting.  Painted up they look okay I think.  Unpainted they may end up decorating some casinos, hotels or villain lairs.

I like using these kinds of picks for model work.  Bamboo shreds and causes splinters.

The plastic end makes them easy to find on a crowded table.

Longer than most toothpicks they are more versatile. 

Nice and smooth, and sharp.